We carry out partial and complete restoration (except for replacing the barrel with a new one) of guns. Work begins with an analysis that carefully identifies the condition to be repaired and allows for a more accurate estimate of the financial costs before work begins.

The purpose of repairing guns is to restore serviceability, increase reliability in operation and improve its combat characteristics.

Basic gun repair work includes:
Gun barrel:
• Cleaning the inner surface of the barrel from corrosion and removing copper plating using a chemical method;
• Removing dents on the outer surface of the barrel;
• Elimination of nicks and scratches in the charging chamber;
• Elimination of nicks and scratches on the control site;
• Removing metal deposits along the edges of the muzzle brake windows;
• Elimination of muzzle brake wobble and rotation;
• Eliminating the instability of the pivot beam.

Gun guidance mechanisms:
• Elimination of tight movement of flywheels of guidance mechanisms;
• Elimination of increased backlash (backlash) of guidance mechanisms;
• Elimination of increased vertical and horizontal instability of the swinging part of the implement.

Recoil devices for guns:
• Replacement of rubber products and seals in the recoil brake and knurlier;
• Repairing fluid leaks in the recoil brake and knurlier;
• Eliminating air leaks in the knurl;
• Eliminating the causes of extended rollback;
• Eliminating the causes of shortened rollback;
• Elimination of under-rolling and jerky over-rolling;
• Elimination of sharp roll-up (roll-up with knocking).

Gun bolt:
• Repair of impact mechanism elements;
• Adjusting or replacing ejectors;
• Repair of semi-automatic mechanisms;
• Repair of the re-cocking mechanism;
• Repair of the holding mechanism.

Sights:
• Elimination of dead moves in sight mechanisms;
• Elimination of the irreversibility of longitudinal and transverse instability of the sight;
• Elimination of vertical and horizontal unsteadiness of panorama in the basket;
• Replacing sight optics.

Electrical equipment – repair and restoration of electrical equipment.

Note: During repair and restoration work, the protective coating of all types of rods and cylinders is also restored.

100 mm MT-12 "Rapira" anti-tank guns;

We carry out partial and complete restoration (except for replacing the barrel with a new one) of howitzers. Work begins with an analysis that carefully identifies the condition to be repaired and allows for a more accurate estimate of the financial costs before work begins.

The purpose of repairing of howitzers is to restore serviceability, increase reliability in operation and improve its combat characteristics.

Basic howitzers repair work includes:
Howitzer barrel:
• Cleaning the inner surface of the barrel from corrosion and removing copper plating using a chemical method;
• Removing dents on the outer surface of the barrel;
• Elimination of nicks and scratches in the charging chamber;
• Elimination of nicks and scratches on the control site;
• Removing metal deposits along the edges of the muzzle brake windows;
• Elimination of muzzle brake wobble and rotation;
• Eliminating the instability of the pivot beam.

Howitzer guidance mechanisms:
• Elimination of tight movement of flywheels of guidance mechanisms;
• Elimination of increased backlash (backlash) of guidance mechanisms;
• Elimination of increased vertical and horizontal instability of the swinging part of the implement.

Recoil devices for howitzers:
• Replacement of rubber products and seals in the recoil brake and knurlier;
• Repairing fluid leaks in the recoil brake and knurlier;
• Eliminating air leaks in the knurl;
• Eliminating the causes of extended rollback;
• Eliminating the causes of shortened rollback;
• Elimination of under-rolling and jerky over-rolling;
• Elimination of sharp roll-up (roll-up with knocking).

Balancing mechanism:
• Replacement of rubber products and seals in the balancing mechanism;
• Elimination of fluid leakage in the balancing mechanism;
• Elimination of air leaks in the balancing mechanism.

Howitzer hydraulic jack:
• Replacement of rubber products and seals of the hydraulic jack;
• Elimination of hydraulic jack fluid leaks.

Howitzers bolt:
• Repair of impact mechanism elements;
• Adjusting or replacing ejectors;
• Repair of semi-automatic mechanisms;
• Repair of the re-cocking mechanism;
• Repair of the holding mechanism.

Sights:
• Elimination of dead moves in sight mechanisms;
• Elimination of the irreversibility of longitudinal and transverse instability of the sight;
• Elimination of vertical and horizontal unsteadiness of panorama in the basket;
• Replacing sight optics.

Electrical equipment – repair and restoration of electrical equipment.
Note: During repair and restoration work, the protective coating of all types of rods and cylinders is also restored. In addition, work is being carried out to convert samples D-30 to D-30A:
• Carrying out work on samples to the extent of major repairs in accordance with the requirements of the technical specifications for the 122-mm howitzer D-30A-2A18M;
• Replacing a mechanical jack with a hydraulic one;
• Refinement and installation of the brake system;
• Replacement of electrical equipment lights;
• Replacing wheels with rubber tires with pneumatic tires.

122 mm D-30 and D-30A howitzers

We carry out partial and complete restoration (except for replacing the barrel with a new one) of guns. Work begins with an analysis that carefully identifies the condition to be repaired and allows for a more accurate estimate of the financial costs before work begins.

The purpose of repairing of guns is to restore serviceability, increase reliability in operation and improve its combat characteristics.

Basic guns repair work includes:
Gun barrel:
• Cleaning the inner surface of the barrel from corrosion and removing copper plating using a chemical method;
• Removing dents on the outer surface of the barrel;
• Elimination of nicks and scratches in the charging chamber;
• Elimination of nicks and scratches on the control site;
• Removing metal deposits along the edges of the muzzle brake windows;
• Elimination of muzzle brake wobble and rotation;
• Eliminating the instability of the pivot beam.

Gun guidance mechanisms:
• Elimination of tight movement of flywheels of guidance mechanisms;
• Elimination of increased backlash (backlash) of guidance mechanisms;
• Elimination of increased vertical and horizontal instability of the swinging part of the implement.

Recoil devices for guns:
• Replacement of rubber products and seals in the recoil brake and knurlier;
• Repairing fluid leaks in the recoil brake and knurlier;
• Eliminating air leaks in the knurl;
• Eliminating the causes of extended rollback;
• Eliminating the causes of shortened rollback;
• Elimination of under-rolling and jerky over-rolling;
• Elimination of sharp roll-up (roll-up with knocking).

Balancing mechanism:
• Replacement of rubber products and seals in the balancing mechanism;
• Elimination of fluid leakage in the balancing mechanism;
• Elimination of air leaks in the balancing mechanism.

Gun hydraulic jack:
• Replacement of rubber products and seals of the hydraulic jack;
• Elimination of hydraulic jack fluid leaks.

Gun bolt:
• Repair of impact mechanism elements;
• Adjusting or replacing ejectors;
• Repair of semi-automatic mechanisms;
• Repair of the re-cocking mechanism;
• Repair of the holding mechanism.

Sights:
• Elimination of dead moves in sight mechanisms;
• Elimination of the irreversibility of longitudinal and transverse instability of the sight;
• Elimination of vertical and horizontal unsteadiness of panorama in the basket;
• Replacing sight optics.

Electrical equipment – repair and restoration of electrical equipment.
Note: During repair and restoration work, the protective coating of all types of rods and cylinders is also restored.

130 mm M46 guns

We carry out partial and complete restoration (except for replacing the barrel with a new one) of howitzer-guns. Work begins with an analysis that carefully identifies the condition to be repaired and allows for a more accurate estimate of the financial costs before work begins.

The purpose of repairing of howitzer-guns is to restore serviceability, increase reliability in operation and improve its combat characteristics.

Basic howitzer-guns repair work includes:
Howitzer-gun barrel:
• Cleaning the inner surface of the barrel from corrosion and removing copper plating using a chemical method;
• Removing dents on the outer surface of the barrel;
• Elimination of nicks and scratches in the charging chamber;
• Elimination of nicks and scratches on the control site;
• Removing metal deposits along the edges of the muzzle brake windows;
• Elimination of muzzle brake wobble and rotation;
• Eliminating the instability of the pivot beam.

Howitzer-gun guidance mechanisms:
• Elimination of tight movement of flywheels of guidance mechanisms;
• Elimination of increased backlash (backlash) of guidance mechanisms;
• Elimination of increased vertical and horizontal instability of the swinging part of the implement.

Recoil devices for howitzer-guns:
• Replacement of rubber products and seals in the recoil brake and knurlier;
• Repairing fluid leaks in the recoil brake and knurlier;
• Eliminating air leaks in the knurl;
• Eliminating the causes of extended rollback;
• Eliminating the causes of shortened rollback;
• Elimination of under-rolling and jerky over-rolling;
• Elimination of sharp roll-up (roll-up with knocking).

Balancing mechanism:
• Replacement of rubber products and seals in the balancing mechanism;
• Elimination of fluid leakage in the balancing mechanism;
• Elimination of air leaks in the balancing mechanism.

Howitzer-gun hydraulic jack:
• Replacement of rubber products and seals of the hydraulic jack;
• Elimination of hydraulic jack fluid leaks.

Howitzer-gun bolt:
• Repair of impact mechanism elements;
• Adjusting or replacing ejectors;
• Repair of semi-automatic mechanisms;
• Repair of the re-cocking mechanism;
• Repair of the holding mechanism.

Sights:
• Elimination of dead moves in sight mechanisms;
• Elimination of the irreversibility of longitudinal and transverse instability of the sight;
• Elimination of vertical and horizontal unsteadiness of panorama in the basket;
• Replacing sight optics.

Electrical equipment – repair and restoration of electrical equipment.
Note: During repair and restoration work, the protective coating of all types of rods and cylinders is also restored.

CATALOG

Towed artillery systems