We carry out partial and complete restoration (except for replacing the barrel with a new one) of mortars. Work begins with an analysis that carefully identifies the condition to be repaired and allows for a more accurate estimate of the financial costs before work begins.

The purpose of repairing mortars is to restore serviceability, increase reliability in operation and improve its combat characteristics.

Basic mortar repair work includes:
Barrel:
• Cleaning the inner surface of the barrel from corrosion and removing copper plating using a chemical method;
• Removing dents on the outer surface of the barrel;
• Elimination of nicks and nicks in the breech.

Base plate:
• Cleaning corrosion from the outer surface of the base plate;
• Removing dents and nicks on the outer surface of the base plate, as well as on the thrust bearing, openers, corners and ribs.

Carriage-biped:
• Cleaning the outer surface of the biped carriage from corrosion;
• Removing dents and nicks on the outer surface of the biped carriage;
• Repair of parts and mechanisms of a biped carriage (two-legged – right-left tubular post, swivel, handle, outer pipe, clamp with shock absorbers and pipe).

Double charging fuse (if available):
• Cleaning the outer surface of the double charging fuse from corrosion;
• Checking the safety mechanism, bushing body, split ring and nut;
• Elimination of detected faults in the technical condition of the double charging fuse.

Guidance Mechanisms:
• Checking the leveling, lifting and turning mechanisms; 
• Elimination of stiff movement of leveling, lifting and turning mechanisms;
• Elimination of increased vertical and horizontal instability of leveling, lifting and turning mechanisms.

Shock absorbing device:
• Checking shock absorbers (body, rod, spring) and clamp (clip, basting, axle, washer, cotter pin, handle);
• Checking the fastening of shock absorbers to the clamp;
• Elimination of identified faults in the shock-absorbing device.

Breech:
• Checking the breech (body, firing pin, spring, plate);
• Repair of detected faults.

Sights (if available):
• Elimination of dead moves in optical sight mechanisms;
• Elimination of irreversibility of longitudinal and transverse instability of an optical sight;
• Elimination of vertical and horizontal instability of the optical sight in the bracket;
• Replacing sight optics.

Electrical equipment ((if available) – repair and restoration of electrical equipment.

60 mm mortar systems

We carry out partial and complete restoration (except for replacing the barrel with a new one) of mortars. Work begins with an analysis that carefully identifies the condition to be repaired and allows for a more accurate estimate of the financial costs before work begins.

The purpose of repairing mortars is to restore serviceability, increase reliability in operation and improve its combat characteristics.

Basic mortar repair work includes:
Barrel:
• Cleaning the inner surface of the barrel from corrosion and removing copper plating using a chemical method;
• Removing dents on the outer surface of the barrel;
• Elimination of nicks and nicks in the breech.

Base plate:
• Cleaning corrosion from the outer surface of the base plate;
• Removing dents and nicks on the outer surface of the base plate, as well as on the thrust bearing, openers, corners and ribs.

Carriage-biped:
• Cleaning the outer surface of the biped carriage from corrosion;
• Removing dents and nicks on the outer surface of the biped carriage;
• Repair of parts and mechanisms of a biped carriage (two-legged – right-left tubular post, swivel, handle, outer pipe, clamp with shock absorbers and pipe).

Double charging fuse:
• Cleaning the outer surface of the double charging fuse from corrosion;
• Checking the safety mechanism, bushing body, split ring and nut;
• Elimination of detected faults in the technical condition of the double charging fuse.

Guidance Mechanisms:
• Checking the leveling, lifting and turning mechanisms; 
• Elimination of stiff movement of leveling, lifting and turning mechanisms;
• Elimination of increased vertical and horizontal instability of leveling, lifting and turning mechanisms.

Shock absorbing device:
• Checking shock absorbers (body, rod, spring) and clamp (clip, basting, axle, washer, cotter pin, handle);
• Checking the fastening of shock absorbers to the clamp;
• Elimination of identified faults in the shock-absorbing device.

Breech:
• Checking the breech (body, firing pin, spring, plate);
• Repair of detected faults.

Sights:
• Elimination of dead moves in optical sight mechanisms;
• Elimination of irreversibility of longitudinal and transverse instability of an optical sight;
• Elimination of vertical and horizontal instability of the optical sight in the bracket;
• Replacing sight optics.

Electrical equipment – repair and restoration of electrical equipment.

82 mm mortar systems

We carry out partial and complete restoration (except for replacing the barrel with a new one) of mortars. Work begins with an analysis that carefully identifies the condition to be repaired and allows for a more accurate estimate of the financial costs before work begins.

The purpose of repairing mortars is to restore serviceability, increase reliability in operation and improve its combat characteristics.

Basic mortar repair work includes:
Barrel:
• Cleaning the inner surface of the barrel from corrosion and removing copper plating using a chemical method;
• Removing dents on the outer surface of the barrel;
• Elimination of nicks and nicks in the breech.

Carriage:
• Cleaning the outer surface of the carriage from corrosion;
• Removing dents and nicks on the outer surface of the carriage;
• Repair of parts and mechanisms of a carriage (two-legged – right-left tubular post, swivel, handle, outer pipe, clamp with shock absorbers and pipe).

Base plate:
• Cleaning corrosion from the outer surface of the base plate;
• Removing dents and nicks on the outer surface of the base plate, as well as on the thrust bearing, openers, corners and ribs.

Double charging fuse:
• Cleaning the outer surface of the double charging fuse from corrosion;
• Checking the safety mechanism, bushing body, split ring and nut;
• Elimination of detected faults in the technical condition of the double charging fuse.

Guidance Mechanisms:
• Checking the leveling, lifting and turning mechanisms; 
• Elimination of stiff movement of leveling, lifting and turning mechanisms;
• Elimination of increased vertical and horizontal instability of leveling, lifting and turning mechanisms.

Shock absorbing device:
• Checking shock absorbers (body, rod, spring) and clamp (clip, basting, axle, washer, cotter pin, handle);
• Checking the fastening of shock absorbers to the clamp;
• Elimination of identified faults in the shock-absorbing device.

Breech with firing device::
• Checking the breech;
• Checking the firing device (cocking mechanism and firing mechanism);
• Repair of detected faults.

Sights:
• Elimination of dead moves in optical sight mechanisms;
• Elimination of irreversibility of longitudinal and transverse instability of an optical sight;
• Elimination of vertical and horizontal instability of the optical sight in the bracket;
• Replacing sight optics.




Electrical equipment – repair and restoration of electrical equipment.

Wheel travel
• Checking and eliminating detected malfunctions of the trolley;
• Checking and eliminating detected malfunctions of the shock-absorbing device;
• Checking and eliminating detected malfunctions of the suspension mechanism;
• Checking and eliminating detected malfunctions of the traction.

CATALOG

Mobile mortar systems